
Artist - Jenna Roby |
|
Supplies:
Dream word stamp (809-112C)
Lg Sun stamp (012-003F)
Black permanent ink & ink refill
Versamark ink
Embossing powders: pearl ~ pink, violet & green; Goddess Gold; Kaleidoscope &
clear
Gold paint pen
Iridescent cellophane
Lg Wave deco scissors
Wooden “stamp” embellishment
Junk CD
Pin back
Heat tool
Forceps or long handled tweezers
Child’s cheap paint brush
Extra strength glue or epoxy (whatever you use must be able to bond wood to
plastic)
Shallow box lined with aluminum foil
1)
Place the cd in the box and heat until it just starts to melt.
2)
When the cd has cooled enough to handle use the scissors to cut it into
pieces starting at the out edge and cutting towards the center. You may have to
reheat the cd several times to get the pieces you want & the plastic is
difficult to cut. Persevere!
3)
Use the brush to coat the front and back of the cd piece with the
permanent ink refill. Paint one side and use the heat tool to dry it and then do
the same with the other side. (If you don’t like inky fingers, wear gloves!
Also, protect your work space with scrap paper.)
4)
Stamp the word image using the black ink onto the cellophane. Let dry
then trim off the excess cellophane.
5)
Apply the versamark ink to the front of the cd piece but not where the
“hole” was.
6)
Sprinkle the clear ep over the ink and place the piece in the box.
7)
Attach the forceps to the area where the “hole” was or hold on there with
the tweezers.
8)
Use the heat tool to melt the powder until smooth.
9)
Apply another coat of clear powder & heat. Release the forceps.
10)
Keeping the heat tool running to the side, use your fingers to sprinkle
the pearl eps on the hot clear ep, apply the heat tool to melt the pearls into
the clear but do not over heat or you will loose the colors.
11)
Repeat step 10 for the Goddess Gold & Kaleidoscope eps. Turn off the heat
tool.
12)
Crinkle the cellophane and smooth it back out.
13)
Carefully place the phrase on top of the very warm ep. Make sure no edges
stick up.
14)
Use the heat tool to adhere the cellophane to the surface but do not over
heat or you will melt the cellophane. Let cool.
15)
Apply the versamark ink to the front of the cd piece but not where the
“hole” was.
16)
Sprinkle the clear ep over the ink and place the piece in the box.
17)
Attach the forceps to the area where the “hole” was or hold on there with
the tweezers.
18)
Use the heat tool to melt the powder until smooth.
19)
Apply another coat of clear powder & heat. Release the forceps. Let cool.
20)
Use the paint pen to coat the front & sides of the “stamp” piece. Let
dry.
21)
Stamp the face of the sun using the black ink onto the “stamp” piece. Let
dry.
22)
Use the extra strength glue to attach the “stamp” piece to the area where
the “hole” was at the bottom of the cd piece. Let dry over night.
23)
Attach the pin back.
TA DA! A beautiful faux dichroic gem to charm admirers. ~
Jenna
|

Lg. Sun 012-003F
2" x 2"
|

Dream 809-112C
Size 2.5" by1"
|
|