
Created by - Andrea Cloutier |
|
Supplies:
Lasting Impressions with Panache Stamp: Eiffel Tower
004-005I
Tsukineko StazOn Ink: Jet Black
Tsukineko VersaMagic Ink: Aegean Blue
Ranger Adirondack Dye Ink: Rust
Colorbox Fluid Chalk Ink: Charcoal
Lucky Squirrel White Polyshrink
Making Memories Fabric Label
Wire, Brads, Beads & Photo Corners
Tools: Stylus Tool, Heat Tool & 1/8” circle punch
Paper & Letter Stickers: BasicGrey Skate Shoppe and White
cardstock
Instructions for 12x12 layout:
1.
Trim a piece of white cardstock to 4”x6” size. Stamp the Eiffel Tower
image using charcoal ink. Also stamp the same image on a piece of scrap paper to
use as a mask.
2.
Cut out the Eiffel Tower from the scrap paper and place over the main
image. Using a Stylus Tool or sponge, apply Aegean Blue ink for the sky around
the Eiffel Tower and apply Rust for the ground cover. Set aside.
3.
Stamp the Eiffel Tower image onto white shrink plastic using StazOn Jet
Black. Repeat 4 times so that you’ll have 5 images total.
4.
Cut out each Eiffel Tower and punch a hole in the top of the piece.
5.
Shrink each image using the heat tool.
6.
Thread each charm onto a piece of long wire, making loops and twisting to
secure each charm in place. Set aside.
7.
Trim 3 different patterned papers to 1 ½” width. Vary the length of each
one by trimming the ends.
8.
Adhere one strip of patterned paper horizontally about 2” down from the
top edge of the background paper. Line up the right end of the strip to the
right edge of the background paper.
9.
Adhere another strip of different patterned paper horizontally about 2”
down from the first piece. Line up the right edges.
10.
Adhere the 3rd and last piece of patterned paper directly
under the previous piece. Line up the right edges once again.
11.
Adhere fabric label under the first patterned paper strip towards the
left side.
12.
Adhere letter stickers below the label. Write any journaling at this
time.
13.
Apply photo corners to the corners of the Eiffel Tower 4”x6” paper.
14.
Adhere to the center of the layout, just to the right of the fabric label
and journaling.
15.
Thread beads onto one end of the charm chain. Loop at the end and secure
to the background paper underneath the stamped image by inserting a brad at the
end.
16.
Thread beads to the other end of the charm chain and secure with a brad
to the desired location.
17.
Adhere charms to the background paper if desired.
18.
Trim the ends of the wire if needed. Done!
|